Resetting the Q1
If you are experiencing problems with the Q1, you can reset it and start again. Resetting the Q1 will clear all the stored pairing settings, delete any speed dial numbers you have stored in the headset, and put the device back into pair mode.
Parent topic: Troubleshooting
To Reset the Q1
- Make sure the Q1 is turned on and is not connected to any phones.
- Press all three Q1 buttons (the BlueAnt button, "Vol +" and "Vol -") once together.
You will hear a message telling you that the Q1 has been reset, and the device
will go straight to pair mode. Follow the voice prompts to pair the Q1 with your
phone.
Q1 User Guide- Introduction
- Overview
- Getting Started
- Using the Q1
- Pairing
- Noise Reduction and Voice Isolation
- Multiple Calls (Call Waiting)
- Charging the Q1
- Setting Up Speed Dials
- Transferring Audio from the Q1 to your Phone
- Sensitivity Level
- Using More Than One Phone At The Same Time (Multipoint)
- Using your Q1 with your Computer
- Troubleshooting
- Q1 Reference