Pairing the Q1 with your Computer
In order to use the Q1 with your Bluetooth-enabled computer, you need to
pair the Q1 with your PC. The pairing process is similar to the process of
pairing a phone.
-
Start the Bluetooth software on your computer, and make sure
that your computer's Bluetooth hardware is active.
-
Put the Q1 into pairing mode (for example by using the "Pair Me"
command).
-
Use your computer's Bluetooth software to search for devices, and select the BlueAnt Q1
from the list. If your computer prompts you to select a Bluetooth profile,
select the Headset Profile.
If you are not prompted to select a profile, the computer may default to the
Hands-Free Profile. If you subsequently experience problems using the Q1 with
your computer, you should repeat the pairing process and make sure that the
computer is configured to use the Headset Profile (you may need to select
"Advanced" or "Expert" mode in the Bluetooth software in order for your computer
to prompt you to choose between the Bluetooth profiles).
-
Once the pairing process is complete, you are ready to use the Q1 with your computer. If the
computer did not connect to the Q1 automatically, use the options in the Bluetooth software to
connect to the Q1. This initiates a voice call between your computer and the headset (so
you will need to click the BlueAnt button to answer the call). Once you have accepted the call
from your computer, your computer's audio will be routed through the Q1 headset.
Q1 User Guide