Getting Started

To use the Q1, you need to pair it with your phone. Pairing creates a stored link between the phone and the headset. Once paired, they will reconnect automatically in future.

If you haven't already fitted it, locate the ear hook that came in the box with your Q1, and attach it by pushing the smaller end of the hook through the hole on the back of the Q1. See Wearing the Q1 for more information about attaching the ear hook.
Put the Q1 in your ear.
You can wear the Q1 in either ear. For the best results:
- Angle the headset so that it points towards your mouth (this will help the Q1's microphones pick up your voice).
- Make sure that the bottom end of the Q1 does not rest against your face. One of the Q1's microphones is located on the back of the Q1, at the end furthest away from the ear bud: if the microphone is resting against your face then it will make it harder for the Q1 to pick up your voice.
Turn the Q1 on by holding down (the BlueAnt button) until you hear the startup sound.
- You will need to hold the button for about 3 seconds.
- If this is the first time you have used your Q1, it will automatically play a welcome message and go into pairing mode. You will hear the voice prompts start to take you through the pairing process.
- If the pairing process does not start automatically, click (the BlueAnt button), wait for the Q1 to ask you to "Say A Command" and then say the command "Pair Me" to go into pairing mode.
Follow the voice prompts to pair the Q1 with your phone.
If your phone prompts you for a password or security code, enter "0000" (four zeros).

When the pairing process finishes, you are ready to go: just click the BlueAnt button and say one of the voice commands.

< Previous Topic Next Topic >