Q1 User Guide- Introduction
- Overview
- Getting Started
- Using the Q1
- Pairing
- Noise Reduction and Voice Isolation
- Multiple Calls (Call Waiting)
- Charging the Q1
- Setting Up Speed Dials
- Transferring Audio from the Q1 to your Phone
- Sensitivity Level
- Using More Than One Phone At The Same Time (Multipoint)
- Using your Q1 with your Computer
- Troubleshooting
- Q1 Reference
Full List of Voice Commands
| Command | Say This To... |
|---|---|
| "Am I Connected?" | Find out if the Q1 is connected to your phone. If no phone is connected, then the Q1 will attempt to connect to any paired phones that are in range when you say this command. |
| "Answer" | Answer an incoming call.
Before you can use this command, you must wait for the Q1 to read out the phone number and ask you whether you want to answer the call. You won't be able to answer or reject a call with your voice if you have turned off the "Incoming Call Function" in the "Settings Menu". |
| "Call Back" | Call back the last incoming call you received on the
currently connected phone while it was connected to the Q1.
The "Call Back" function calls a number retrieved from the Q1 headset, so it may not necessarily be the last incoming call received on the phone (if you received a call while the phone was disconnected from the Q1). |
| "Call Speed Dial 1" to "Call Speed Dial 8" | Call the corresponding speed dial stored on your phone.
For example, say "Call Speed Dial 3" to call the number stored in speed dial 3 on your phone. You can also set up speed dials in your Q1 headset itself. For more information, see Setting Up Speed Dials. |
| "Call Information" | Call your local information service.
This command will only work if your Q1 has been supplied to you with an information service number stored in the "Call Information" setting on the headset. |
| "Cancel" | Cancel the current operation. |
| "Check Battery" | Check the battery level on the headset and the currently connected phone. |
| "Go Back" | Return to the main menu from the "Settings Menu" or "Teach Me" options. |
| "Ignore" | Reject an incoming call.
Before you can use this command, you must wait for the Q1 to read out the phone number and ask you whether you want to answer the call. You won't be able to answer or reject a call with your voice if you have turned off the "Incoming Call Function" in the "Settings Menu". |
| "Pair Me" | Go into pairing mode. |
| "Phone Commands" | Access your phone's voice dialing feature, if it has one. Depending on your phone model, you may need to record voice tags on the phone in order to use the phone's voice dialing. |
| "Redial" | Redial the last number you called on the currently connected
phone.
The "Redial" function calls a number retrieved from the phone, so it may not necessarily be the last number you called if you are using more than one phone with the Q1. |
| "What Can I Say?" | Hear a list of the currently available commands. If you are in one of the sub menus, this command will list the options from that sub menu. |
| "Switch Headset Off" | Turn the Q1 off. The headset will ask you to confirm that you want to switch it off. |
"Settings Menu"
Use the "Settings Menu" command to access the following options. When you say "Settings Menu" the Q1 will read out the commands available on the "Settings Menu". You must wait for the Q1 to finish reading the commands before you can say one of the commands.
| Command | Say This To... |
|---|---|
| "Sensitivity Level" | Change the sensitivity level of the Q1's
voice recognition. This setting
determines how precisely the words that you say need to match the
speech patterns that the Q1 has been configured to recognize.
You can set this to "High",
"Medium", or "Low".
When the level is set to "High" the commands you give the Q1 will need to match the speech pattern it is expecting more exactly, while "Low" is less restrictive and will accept your commands even if they don't precisely match the expected speech pattern. If you find that the Q1 is not recognizing your voice commands at all, you should change to a lower sensitivity level. You may wish to switch to a higher sensitivity level if the Q1 often responds to your voice commands by carrying out the wrong command. |
| "Incoming Call Function" | Turn the incoming call function on or off. If you turn the incoming call function off, then the Q1 will not announce the number of any incoming calls, and you will not be able to answer calls using your voice. |
| "Say A Command Prompt" | Turn the "Say A Command" prompt on or off. If you turn off the prompt, you will hear a beep instead. |
| "Turn Off Voice Control" | Turn off voice control. If you turn off the voice control, then you will only be able to control the Q1 using the buttons. See Button Functions for a full list of the available controls. |
| "LED Light" | Turn the LED Light on or off.
When you turn the LED off, it will still light up when you turn the Q1 on and off, but not at other times. |
| "Reset the Q1" | Reset the Q1 and go back to pair mode. Resetting the Q1 deletes:
|
"Teach Me"
Use the "Teach Me" command to access the following options that help you learn about your Q1. When you say "Teach Me" the Q1 will read out the commands available on the "Teach Me" menu. You must wait for the Q1 to finish reading the commands before you can say one of the commands.
| Command | Say This To... |
|---|---|
| "Try It Now" | Practice the voice commands: the Q1 will read out each command for you to repeat back. |
| "Speed Dial Setup" | Learn about how speed dial settings work in the Q1. For more information about setting up speed dials, see Setting Up Speed Dials. |
| "Tips and Tricks" | Hear some tips on using your Q1. |